Every aspect of a Peli Case is built to last. There may come a time, however, when certain items, like a latch, need to be replaced. To find out how, take a look at our guide below, or watch the video tutorial:
Each latch is held in with stainless steel pins, and just like the case, they are built to stay in there for life, so there's a certain knack to removing them. As there are two different types of latches, there are two slightly different ways to replace them.
Starting with the latch closed, use a flat head punch and a hammer to hit the head of the latch pin with force. If you don’t have a flat head punch to hand, a small Phillips head screwdriver, or even the new replacement pin will work just as well.
Repeat this process until the serrated end of the pin pops out at the opposite side of the latch as pictured above.
Use pliers to grip the serrated end of the pin and hammer them gently to remove the pin from the latch rib. Lift the latch to remove it.
If your latch pin only has one visible side, hammer the punch until the pin is flush with the latch rib at the opposite side, but not sticking out.
Lift the latch and pull it away from the latch rib to remove it.
Place the new latch onto the lid and insert the latch pin smooth end first.
Use the pliers and hammer to drive the pin until it rests flush with the surface of the latch rib.
Your case should now be restored back to its former glory!